原创力文档- 10
- 0
- 约2.04万字
- 约 3页
- 2019-08-23 发布于浙江
- 举报
Designation: A 713 – 93 (Reapproved 1998)
Standard Specification for
Steel Wire, High-Carbon Spring, for Heat-Treated
Components1
This standard is issued under the fixed designation A 713; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon () indicates an editorial change since
您可能关注的文档
- AMS 2372 低碳和低合金钢锻件的质量保证取样和试验.pdf
- AMS 2759-2低合金钢零件的热处理最小抗拉强度220 ksi（1517 MPa）及更高.pdf
- AMS 2759-3热处理沉淀 - 硬化耐腐蚀和马氏体时效钢零件.pdf
- AMS 2759-4热处理奥氏体耐腐蚀钢零件.pdf
- AMS 2759-5热处理马氏体耐腐蚀钢零件.pdf
- AMS 2759-6低合金钢零件的气体氮化和热处理.pdf
- AMS 2759-7A渗碳级钢零件的渗碳及热处理.pdf
- AMS 2759-10氮化电位控制的自动气体氮化.pdf
- AMS 2759-11钢件的应力消除.pdf
- AMS-S-13165喷丸强化金属零件.pdf
文档评论（0）