计算机网络技术第11、12讲.ppt

(3)配置交换机，将端口分配到VLAN Switch# Switch#configure terminal Enter configuration commands, one per line. End with CNTL/Z. Switch(config)#interface range fastEthernet 0/1-8 //将交换机的fa0/1-8端口加入VLAN10 0d:0h:9m:6s @5-CONFIG:Configured from outband Switch(config-if-range)#switchport access vlan 10 0d:0h:9m:35s @5-CONFIG:Configured from outband Switch(config-if-range)#exit 0d:0h:9m:52s @5-CONFIG:Configured from outband Switch(config)#interface range fastEthernet 0/9-16 //将交换机的fa0/9-16端口加入VLAN20 0d:0h:10m:29s @5-CONFIG:Configured from outband Switch(config-if-range)#switchport access vlan 20 0d:0h:10m:42s