第9讲螺纹连接件的画法.pptVIP

画图步骤 Steps: 先画俯视图较方便 Top view first recommended 2. 螺钉联接 Screw joints 螺钉连接用于受力不大且不要求调整的机构。Screw joints are used on machines requiring few adjustments and lower strength. 光孔 Clearance hole 螺纹孔 Tapped hole δ bm L 0.5d 旋合长度bm与被零件材料有关: Length of screwed bm is determined by material of jointed part: 钢Steel： bm=d 铸铁Cast iron: bm=1.25d 铜Copper: bm=1. 5d 铝Aluminum: bm=2d 螺钉计算长度： Length calculated by: Ld=bm+δ 查表定L -P511 Find L in list of P511 参见P418 图15-28 Refer to P418 Fig. 15-28 螺钉联接画法 Drawing of bolt joints 45° 常见的错误画法Incorrect drawings： 允许将螺纹画到底 Simpli