D5865-19 煤和焦炭总热值的标准试验方法.pdf

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. Designation: D5865/D5865M − 19 Standard Test Method for Gross Calorific Value of Coal and Coke1 This standard is issued under the fixed designation D5865/D5865M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (´) indicates an editorial change since the last revision or reapproval. 1. Scope* D3177 Test Methods for Total Sulfur in the Analysis Sample of Coal and Coke (Withdrawn 2012)3 1.1 This test method pertains to the determination of the gross calorific value of coal and coke by either an isoperibol or D3180 Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases adiabatic combustion calorimeter. D4239 Test Method for Sulfur in the Analysis Sample of 1.2 The values stated in either SI units or inch-pound units Coal and Coke Using High-Temperature Tube Furnace are to be regarded separately as standard. The values stated in Combustion each sy