英文电子资料——STM8 EMC.pdfVIP

AN2860 Application note EMC guidelines for STM8 microcontrollers Introduction To meet the demand for higher performance, complexity and cost reduction, the semiconductor industry develops microcontrollers with both high density design technology and higher clock frequencies. This has intrinsically increased the potential noise emission and noise sensitivity. Therefore, application developers must now apply electromagnetic compatibility (EMC) “hardening” techniques in the design of hardware, PCB layout, firmware and at system level. This application note is intended for application designers who need to reach the optimum level of EMC performance. It gives an overview of microcontroller EMC features and compliance standards. This document focuses on STM8 features, behaviors and on the differences between the STM8 family members. For general information on EMC for ST microcontrollers, refer to the “EMC design guide for ST microcontrollers” application note (AN1709). General recommendations for STM8 devices are summarized in the “Getting started” application notes. These documents also provide basic EMC recommendations. Related documents AN1015: Software techniques for improving microcontroller EMC performance AN1709: EMC design guide for ST microcontrollers AN2677: Getting started with the STM8A AN2752: Getting started with the STM8