Turbo码的编译码原理与仿真毕业论文.docxVIP

PAGE I Turbo码的编译码原理及仿真 内容摘要：Turbo 码是巧妙地将两个简单分量码通过伪随机交织器并行级联来构造具有伪随机特性的长码，并通过在两个输入/输出(SISO)译码器之间进行多次迭代实现了伪随机译码。目前Turbo 码的大部分研究致力于在获得次优性能的情况下减小译码复杂度和时延，从而得到可实现的Turbo码系统。Turbo码具有极其广阔的应用前景，是信道编码界的一个重大突破，被称为二十一世纪的纠错编码。 本文介绍了Turbo 码的产生背景，研究意义，研究现状（编译码技术、Turbo码的设计和分析、Turbo码在CDMA系统中的研究及应用、面向分组的Turbo码、Turbo码与其它通信技术的结合），编码原理、译码原理及Turbo码的性能仿真及设计。 通过对Turbo编译码原理的介绍及性能仿真的波形、频谱图的结果，本文对系统进行性能分析，并作了进一步的改进和调试。仿真结果证明了整个设计系统的正确性。由频谱特性可以看出：Turbo码不仅能够有效地抵御加性高斯噪声，而且具有很强的抗衰落和抗干扰特性。可以看出，Turbo码在现代通信中具有较大的优越性和重要作用。 关键词： turbo码 编码 译码 仿真  Turbo Code principle And Simulation Abstract: The Turbo code is ingeniously two simple component code by pseudo random interleaver parallel cascade constructs has random characteristic of long code, and through the two input / output ( SISO ) decoder between iteration realized pseudorandom decoding. At present, most of research devoted to the Turbo code in obtaining suboptimal performance in the absence of reducing decoding complexity and delay, thus can realize Turbo code system. Turbo code has extremely broad application prospect, is the channel coding community a major breakthrough, known as the twenty-first Century error correction coding. This paper introduces the Turbo code generation background, research significance, research status ( compiled code technology, design of Turbo code and Turbo code analysis, in the CDMA system research and application, a packet-oriented Turbo code, Turbo code and other communications technologies ), encoding, decoding principle of principle and performance simulation of Turbo codes and design. Based on the Turbo compiler code principle introduction and performance simulation waveform, the result of spectrum, the system performance analysis, and made a further improvement and debugging. The simulation results prove that the design scheme is correct. The spectral character can see: Turbo code can not only effectively against the Gauss noise, but also has strong resistance to fading and interference properties. A