美国材料协会标准 A428 - A 428M - 10 (2019).pdfVIP

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. Designation: A428/A428M − 10 (Reapproved 2019) Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles1 This standard is issued under the fixed designation A428/A428M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (´) indicates an editorial change since the last revision or reapproval. This standard has been approved for use by agencies of the U.S. Department of Defense. 1. Scope 2. Referenced Documents 1.1 This test method covers procedures for determining the 2.1 ASTM Standards:2 weight [mass] of coating on aluminum-coated iron or steel D1193 Specification for Reagent Water sheets and wire, and on other aluminum-coated iron and steel E29 Practice for Using Significant Digits in Test Data to articles. Determine Conformance with Specifications E177 Practice for Use of the Terms Precision and Bias in 1.2 The final results determined by this test method shall be ASTM Test Methods expressed in