电池液冷系统的设计终稿.docVIP

摘 要 PAGE PAGE I 摘 要 电动汽车因其节能环保的优点已成为当今汽车产业发展的潮流。但是，电动汽车的电池包在使用过程中的发热现象是一个值得注意和研究的问题。其热量的存在不仅影响电池的性能，而且存在着安全问题。因此电池包的热管理系统是电动汽车和混合动力在所有的工况和环境下安全有效行驶过程中必不可少的辅助系统。 本文第一部分探讨了课题研究的意义以及国内外的研究现状；第二部分简单的介绍了动力电池的特点（以镍氢电池为例）和电池包的散热技术；第三部分针对电池包的结构设计提出了一些具体的设计流程、要求以及参数确定；第四部分以某新能源科技有限公司生产的高性能镍氢动力电容电池-NMCH300S为例运用Pro/E三维软件对电池箱体建模，并用Auto-CAD绘制机械工程图；第五部分运用有限元ANSYS软件对箱体强度校核；第六部分介绍电池冷却系统的其他设备。 本论文总结电池散热系统的冷却方式，运用三维建模软件设计出了电池包的机械结构并绘制出了电池包的机械工程图，并校核了电池包满足其基本的强度要求。 关键字：液冷散热系统，动力电池，箱体设计，强度校核 Abstract Abstract Given the advantages of energy saving and environmental protection，Electric vehicles has become the development trend of todays automotive industry. However, the electric car battery package in the course of the fever phenomenon is worth paying attention to it. The existence of the heat not only affects the battery performance, but also be a security problems. Battery package thermal management system is essential auxiliary systems in the process of electric cars and hybrid driving safe and effective under all conditions and environment. The first part discusses the significance of the research and domestic and international research status; the second part describes the dynamic characteristics of the battery, such as nickel-metal hydride battery and the battery package cooling technology; the third part talks about the battery package project and mainly contains the design of some specific design process, requirements, and parameters; the fourth part specific talks about modeling on the battery-NMCH300S battery box whose battery produced by certain Co., Ltd. of high-performance nickel-hydrogen capacitor, and draws mechanical drawings with Auto-CAD software; the part V uses the finite element ANSYS software to check box strength; the sixth section describes the other equipment of the battery cooling system. This paper have summarized the cooling pattern of battery liquid cooling system, used 3D modeling software to design the mechanical structure of the battery pack an