单元式生产布局cell-line.pptVIP

  • 55
  • 0
  • 约3.97万字
  • 约 35页
  • 2019-09-24 发布于福建
  • 举报
8 - * 最上一层不要太高,以免影响主管们的视线。 The top is low enough not to block the view of the supervisor. 最下一层不要太矮,要不用过大的弯膝或弯腰就可以够着。 The lowest shelf is high enough to be reached without having to kneel or bend excessively. 后面是敞开的,以便供应物料。 The back is open for resupply. 物料架要从后面略为往前面倾斜,让物料能够滚动下来。 The shelves may be sloped down slightly from back to front to enable stock rotation. 一种零件一个位置。 Each part has its own storage location. 每个位置的前后面都贴有标签,并写有独特的地址。 Each storage location is labeled on both the front and back with a unique address. 零件按送料员取料时从左到右的顺序摆放。 Arrange the parts on the shelves in order of water

您可能关注的文档

文档评论(0)

1亿VIP精品文档

相关文档