IC卡公交收费机的设计.pptVIP

IC卡公交收费机设计（三）——MIFARE 1卡读写软件设计;课 程 目 标;项目开发——IC卡公交收费系统;项目设计之三——软件设计;SOR/LOAD KEY;MIFARE 1卡的读写操作步骤 ;#include string.h #include intrins.h #include stdio.h #include MFA.h #include mfreg632.h #include PcdUtils.h #include PcdShare.h #include MfErrNo.h #include TG12864.h #include MAIN.h #define uchar unsigned char #define uint unsigned int #define ulong unsigned long ;main(void) { uchar blockdata[16] ;块数据 uchar TagType[2] ;卡类型号TagType uchar SN[4] ;卡序列号SN uchar sak1 ;卡容量字节Size uchar cmd=1; uchar i=0; uchar Status; rc500_init(); //RC500 INIT M500PcdConfig(); // config mifare init(); //SYSTEM INIT InitLCD();while(1) { Status = M500PiccRequest(PICC_REQSTD, TagType[2]) ;寻卡，卡应答TagType if(Status==MI_OK) { Status = M500PiccAnticoll(0, SN) ;防冲突，卡应答SN } if(Status==MI_OK) { memcpy(card_snr,SN,4); // store serial number in globle var } if(Status==MI_OK) { Status = M500PiccSelect(SN, sak1) ;选择应用，卡应答Size } ;if(Status==MI_OK) { Status=M500PiccAuthE2(PICC_AUTHENT1A,card_snr,0,3) ;密码认证 } if(Status==MI_OK) { Status=M500PiccRead(3, blockdata) ;读块（读余额） blockdata[5]=blockdata[5]-0x05 ;修改块数据 } if(Status==MI_OK) { Status= M500PiccWrite(4,blockdata) ;写块（扣款） } if(Status==MI_OK) { Status = M500PiccHalt() ;暂停，与REQUEST STD组合使用，防止重复操作 } } } ;Answer to Request （请求应答）操作 ;With a “request std” instruction only cards which are not set into a “HALT-mode” will respond to this request,or it may be expanded to all cards in the field with a “request all” option.The first option is needed to prevent the MCM from selecting one card several times. ;初始化与??冲突 （AntiCollion