xx建筑系统样例介绍-巴特勒与众不同 Butler Difference--产品.ppt

* * * * * * * 巴特勒与众不同 Butler Difference-- 产品 Products 产品 Product MR-24? 屋面系统 MR-24 ? Roof System 防水性能 Water-proofing MR-24屋面系统卷边后肋高达70mm，在暴风雨时雨水也不容易漫过屋面板的波峰。 MR-24屋面系统的360度卷边连接形式如同易拉罐的封闭形式，是防水性能最好的屋面连接方式之一。重要的是它的第二个180度卷边是通过电动卷边机施以两吨压力密封完成的，连接非常可靠。 MR-24屋面板的第一个180度卷边是在工厂压制成型的, 巴特勒的一个独特之处是在卷边缝隙处在工厂预先连续地涂上进口的密封胶，这样就可以确保在最恶劣的天气情况下毛细水不会由连接缝隙处渗入。 MR-24? 的纵向连接中的连接孔均为工厂预冲孔, 配合预冲孔的檩条，使定位精准。并在搭接部位使用寿命达20年的密封带和管式密封胶，胶条里含有1立方毫米尼龙粒子，控制连接厚度，防止安装时被挤压。 板搭接部位用高强度的铝合金压条和搭接板连接压紧, 搭接设置在檩条上翼缘正上方，避免人行和积雪对搭接造成破坏、渗漏。 The hole of connection is pre-punched in plant to match factory-punched purlin and assure a proper alignment with roof panel. Meanwhile, the sealant and sealed strip used between panel connection has a long lifetime over 20 years. There is a nylon particle inside of sealant in case of extruding in the erection. A high strength and aluminum alloy up-panel and down-strip will be jointed and pressed tightly, which makes wall panel can be lapped on the purlin, preventing panel from leakage due to walking and heavy snow load. MR-24 rib of roof panel is 70mm after rolling, rainwater is hard to overflow the peak. The MR-24 roof system is the only standing-seam roof system where the critical 180 degrees of the roof panel seam is mechanically field-rolled to complete a 360-degree Pittsburgh double-lock seam by roof runner 2 tons force is pressurized in the seal process and a tightest seam is created. The MR-24 panel‘s first 180 degrees is rolled in factory. An imported sealant will be first infused into the seam in the plant, so the capillarity will not happen through the seam in the bad weather. 产品 Product MR-24? 屋面系统 MR-24 ? Roof System 防风性能 Wind Resistance Capability MR-24板厚为0.63mm，连接件的夹钩由高强度的不锈钢材料制成，比一般的镀锌夹钩更坚固，可抵抗更大风力。 MR-24 panel thickness is 0.63mm, connected to structural clip with a movable stainless steel tab which is rolled into the standing-seam of side lap, except at eave. It can resist more wind uplift force than other clips. MR-24屋面系统通过了60米/秒