机电一体化专业英语教学课件 作者 黄星 夏玉波 Unit 1.pptVIP

EXERCISE 3 EXERCISE 4 EXERCISE 6 Complete the information by translating the part given in Chinese. Sealey Digital External Micrometer 025mm01rdquo Digital external micrometer 0-25mm/0-1”: 7-Button digital micrometer with satin chrome thimble and sleeve Large, easy to read 9mm high LCD readout Display switchable between Metric and Imperial units. Zero display in any position plus take relative readings and tolerance readings. Auto power off switch Includes serial port connection for computer interface Supplied with adjustment wrench and storage case Model No. AK9635D Weight: 0.9 kg Warranty: 1 Year Section B Have a Try This section will help you to understand several forms of machining, and you can see the simple way a small part is produced. External Operations Turning - A turning operation in which a single-point tool moves axially, along the side of the workpiece, removing material to form different features, including steps, tapers, chamfers, and contours. These features are typically machined at a small radial depth of cut and multiple passes are made until the end diameter is reached. For a finish operation, the cutting feed is calculated based on the desired surface roughness and the tool nose radius. Part I Technical and Practical Reading Brass Round Stock Brass is a nice material to work with, though somewhat expensive compared with aluminum or steel. It can add a nice touch of contrasting color to a project that will be displayed. The alloy most often used for home shop work is 360 Passage A Lathe Accessories (I) Center Drills Center drills are stiff, stubby little drills used to start holes in the end of work-piece. If you try to drill a hole in a work-piece without using a center drill you will find that the drill will most likely wobble off center and not drill straight into the work-piece. Standard drilling practice is to first make a facing cut on the end of the work-piece, then dri