利用平行光管检验校正台校正全站仪的竖盘指标差及2C值.pdf

第 34 卷 第 6 期 广东工业大学学报 Vol. 34 No. 6 2017 年 11 月 Journal of Guangdong University of Technology November 2017 doi: 10.12052/gdutxb.160095 利用平行光管检验校正台校正全站仪的 竖盘指标差及2C值 崔家武，周波阳，李锦城 （广东工业大学　土木与交通工程学院， 广东　广州 510006 ） 摘要: 竖盘指标差及2C值（两倍的视准轴误差）是影响全站仪角度测量精度的两个重要因素. 利用平行光管检验校正 台分别对一台竖盘指标差超标的南方测绘NTS-312L型全站仪和一台2C超标的南方测绘NTS-312L型全站仪进行了校 正. 校正后, 前者的竖盘指标差从24″减小至6″, 后者的2C从19″减小至–6″, 校正结果符合《全站型电子速测仪检定规程 JJG100-2003》. 为了对校正结果进行进一步检核, 分别对两台全站仪进行了外业测试, 结果显示, 前者的竖盘指标差在 –3″到6″范围内, 后者的2C值在–6″到5″范围内, 与实验结果基本符合. 关键词: 平行光管检验校正台；全站仪；竖盘指标差；视准轴误差 中图分类号: P202 文献标志码: A 文章编号: 1007–7162(2017)06–0078–05 Calibrating the Index Error of Vertical Circle and 2C of Total Station Using a Calibrator Stand with Collimators Cui Jia-wu, Zhou Bo-yang, Li Jin-cheng (School of Civil and Transportation Engineering, Guangdong University of Technology, Guangzhou 510006, China) Abstract: Index error of vertical circle and 2C value (two times of collimation axis error) are two important indicators which affect the precision of total station’s angle measurement. A South NTS-312L total station with index error of vertical circle overrun and a South NTS-312L total station with 2C overrun are corrected by the calibrator stand with collimators. The experiments show that the index error of vertical circle of the former is reduced from 24″