双回110kV线路改造工程初步设计.doc

PAGE PAGE II 毕业设计（论文） 课 题 名 称BXC（BXT）双回110kV线路改造工程初步设计 学 生 姓 名 陈 亮 亮 学 号 1141201167 系、年级专业电气工程系、11级电气工程及其自动化（输电线路） 指 导 教 师 刘 颂 凯 职 称 高 工 2015年5月22日 PAGE I PAGE I 摘 要 本毕业设计是BXC（BXT）双回110kV线路改造工程初步设计。通过查阅任务书和设计说明书得到了我们所要求的气象区的气象条件以及导线的相关参数和相关的地形，再通过相关资料的公式我们求出导线的各类比载，用列表法求得临界档距，并判断有效临界档距和控制气象条件，以控制条件为已知状态，利用状态方程式计算不同档距、各种气象条件下架空线的应力和弧垂值，按一定的比例绘制出应力弧垂曲线和安装曲线。依据现有的相关资料对防雷设计、接地设计和绝缘子的使用做了论述。依据杆塔的相关信息，来校验杆塔是否符合相关的要求。简述了换位与换相、交叉跨越距离和走廊处理原则。同时提醒我们要注意环境保护和劳动安全。 关键字 ：110kV；初步设计；接地；杆塔 Abstract he graduation project is BXC (BXT) double-circuit 110kV line renovation project preliminary design. After a review of the mission statement and the design specification has been related parameters we require meteorological area meteorological conditions and the cable and associated terrain, and then by a formula related data we obtained various types of wire than load, determined by a list of the critical method span, and determine effective control critical Span and meteorological conditions in controlled conditions to a known state, using the state equation to calculate different span, stress and sag overhead lines under a variety of weather conditions, according to a certain percentage of draw stress Sag curves and installation curve. The basis of the relevant information for mine design, grounding design and insulators used to make the paper. Based tower-related information, to verify compliance with the relevant requirements of the tower. It outlines the transposition and commutation, cross-cutting principles of distance and corridors. Also reminds us to pay attention to environmental protection and labor safety. Keywords ：110kV; preliminary design; groundin