六福_5630-104A_物性表 测试报告.pdfVIP

CHANG CHUN PLASTICS CO., LTD. TH NO. 301, SONGKIANG ROAD, 7 FL.,TAIPEI, 10477 TAIWAN TEL : 886-2-2503-8131 (REF) FAX : 886-2- 2501-8018 Engineering Plastics PBT 5630-104A Polybutylene Terephthalate Technical Data CCP PBT 5630-104A PBT 5630-104A is a 30% glass fiber reinforced injection molding grade. PBT5630-104A 為30%玻璃纖維強化耐燃級聚丁烯對苯二甲酸酯複合材料 Characteristics 品質特性 1)halogen-free 無鹵 2)excellent electrical property 優越的電氣性質 3)excellent temperature resistance, high heat distortion temperature. 優越的耐溫性 及高熱變形溫度 4)excellent mechanic and chemical property 優越的機械與耐化學特性 5)excellent weatherability 耐候性佳 6)excellent wear property 耐磨耗性佳 7)excellent moldability 優越的成型性 8)High resistance to fuels, oil, fats and many solvents 高抗燃料、油料、溶劑特性 Injection Moulding Condition Cylinder temperatures : 240-270℃ 料管溫度 Nozzle temperature : 260-270℃ 射嘴溫度 Mould temperature : 40-120℃, suitable temperature 60-80℃ 模溫 Injection rate : middle - fast 射速 Screw speed : 60-120 rpm, to be chosen in such a way that plasticizing 螺桿轉速 time is just within cooling time. Pressure Injection pressure : 500-1200 ㎏/㎝2 壓力 射壓 Holding pressure : 300-800 ㎏/㎝2 保壓 Back pressure : 0-3 ㎏/㎝2 背壓 Mould shrinkage Mould shrinkage 1.6 ㎜thickness horizon is 0.2-0.5% and 收縮率 vertical is 0.8-1.4% under the test method ASTM D955. 1.6mm 測試試片，流動方向收縮率為0.2-0.5% ，垂直方向 收縮率為0.8-1.4% Packaging 包裝 25 ㎏/ paper bag . 紙袋包裝25kg 2008.10.16 P.1/2 CHANG CHUN PLASTICS CO., LTD.