毕业论文设计《外文翻译--龙门刨床刨台运动模拟器的设计》.doc

l 浙江工业大学教科学院 毕业设计外文资料翻译 设计题目： 龙门刨床刨台运动模拟器的设计 学生姓名： 　 学 号： 专 业： 外文出处： \o "Link to the Book Series of this Chapter" Communications in Computer and Information Science, 1, Volume 225,? \o "Link to the Book of this Chapter" Applied Informatics and Communication, Part 2, Pages 479-486 指导教师： 　 2012年 2 月 12 日 The Design and Application of Sewage Treatment Automation System Based on S7-300 PLC Abstract. For the demand of domestic sewage treatment in county-level city, a plan of Distributed Control System in municipal wastewater treatment automation system is proposed. The main function of which is to supervisory control each sub-system of municipal wastewater treatment via the configuration software WinCC, Siemens S7-300 PLC. The feature of the system is mainly as follows, collection of PLC data, protocol conversion, the transmission of data through fiber, the realization of projects in configuration software, the real-time data storage in database and the release of each kind of report forms, curves, alarm events in display and so on. The idea of the system designation and the detailed characterization of the system are also presented in this paper. Keywords: sewage treatment, Distributed Control System, Siemens S7-300 PLC, WinCC Configuration software. Introduction Along with the rapid development of economy in China, environmental protection has been a prominent issue. Sewage Treatment is one of the most important parts of environmental protection. As the computer technology and sewage treatment technology developed rapidly, it is necessary to monitor the wastewater treatment process with advanced control technology and equipment. The sewage treatment project of Inner Mongolian Huhhot Tumd Left Banner is the typical project among the county-level city of Hohhot, using Cyc