3ECE R1装有R2和HS1白织灯机动车前照灯.pdf

E/ECE/324 Add.1/Rev.4/Amend.3 E/ECE/TRANS/505 16 June 1997 AGREEMENT CONCERNING THE ADOPTION OF UNIFORM TECHNICAL PRESCRIPTIONS FOR WHEELED VEHICLES, EQUIPMENT AND PARTS WHICH CAN BE FITTED AND/OR BE USED ON WHEELED VEHICLES AND THE CONDITIONS FOR RECIPROCAL RECOGNITION OF APPROVALS GRANTED ON THE BASIS OF THESE PRESCRIPTIONS */ (Revision 2, including the amendments entered into force on 16 October 1995) __________ Addendum 1: Regulation No. 1 Revision 4 - Amendment 3 Supplement 6 to the 01 series of amendments - Date of entry into force: 26 December 1996 UNIFORM PROVISIONS CONCERNING THE APPROVAL OF MOTOR VEHICLE HEADLAMPS EMITTING AN ASYMMETRICAL PASSING BEAM AND/OR A DRIVING BEAM AND EQUIPPED WITH FILAMENT LAMPS OF CATEGORIES R2 AND/OR HS1 __________ UNITED NATIONS _____________ */ Former title of the Agreement: Agreement Concerning the Adoption of Uniform Conditions of Approval and Reciprocal Recognition of Approval for Motor Vehicle Equipment and Parts, done at Geneva on 20 March 1958. GE.97-21698 E/ECE/324 Add.1/Rev.4/Amend.3 E/ECE/TRANS/505 Regulation No. 1 page 2 Under Contents, Annexes, amend the titles to read: Annex 1 - Communication concerning the approval or extension or Annex 2 - Special headlamps for agricultural or forest Annex 3 - Minimum requirements for conformity of production control procedures Annex 4