汽车标准 GMW 14124-2012 环境循环.pdf

WORLDWIDE ENGINEERING Test Procedure GMW14124 STANDARDS Automotive Environmental Cycles 1 Scope Note: Nothing in this standard supercedes applicable laws and regulations. Note: In the event of conflict between the English and domestic language, the English language shall take precedence. 1.1 Purpose. This procedure documents various environmental cycles and aging conditions that may be performed prior to testing or as a complete test. This specification does not include standard conditions for testing or preconditioning prior to testing. Those requirements may either be found in the material specification or in GMW3221. 1.2 Foreword. This procedure documents several cycles that have been globally agreed upon for material specifications. Only those cycles shall be selected to create requirements for GMW material specifications. The globally agreed upon cycles for material specifications are: Cycles M, Q, R, S, T, U , V and W . For test cycle uses, see 4.1.2. 1.3 Applicability. Refer to Table 1 for applicability. Note: Some of the test cycles in this specification are best used as a quality control test and are not meant to validate potential field performance. See the platform materials engineer for additional details. 2 References Note: Only the latest approved standards are applicable unless otherwise specified. 2.1 External Standards/Specifications. ISO 9227 VDA 621-415 2.2 GM Standards/Specifications. GMW3221 GMW14444 GMW15288 GMW3286 GMW14729 3 Resources 3.1 Facilities. Not applicable. 3.2 Equipment. 3.2.1 Mechanical Convection Oven capable of maintaining the required temp