《基于磁选机的AutoCAD的二次开发》 (1)》-毕业设计（论文）.docVIP

┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ 装 ┊ ┊ ┊ ┊ ┊ 订 ┊ ┊ ┊ ┊ ┊ 线 ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ 安徽工业大学 毕业设计（论文）说明书 5 - 摘 要 本文旨在介绍基于磁选机的AutoCAD的二次开发。 在机械行业中,AutoCAD软件是最流行的软件,并具有开放性的特点。为了提高设计质量及设计效率，目前比较普遍的做法就是对AutoCAD进行二次开发。 在本次毕业设计中就是以磁选机的零部件的参数化绘图为例，通过对基于磁选机的AutoCAD的二次开发的分析与研究，来详细地描述CAD二次开发的过程。我们以Visual LISP为平台，应用LISP语言编写磁选机零件的参数化绘制程序，应用DCL语言创建人机交流的对话框，并学习了对CAD菜单的加载。最后，当我们完成基于磁选机的AutoCAD的二次开发时，我们就可以通过点击新的CAD菜单，在对话框中输入数据，自动得到磁选机的零件图。 实践表明，AutoCAD的二次开发功能强大，在磁选机的设计中起到非常重要的作用，因此是一个十分有意义的课题。 关键词：AutoCAD，Visual Lisp，二次开发，磁选机 Abstract The paper aims at introduce the secondary development of AutoCAD based on magnetic separator. In the mechanical industry,AutoCAD is the most popular software and has a characteristic of open.In order to improve design quality and efficiency,currently more common practice is to conduct secondary development of AutoCAD software. This graduation design takes the parametric drawing of magnetic separator parts as the example.Then,the realizing process of redevelopments in AutoCAD is presented in detail ,through analyzing and studying the secondary development of AutoCAD based on magnetic separator.We use the Visual LISP as a platform,then apply LISP language compile parametric drawing programs,and DCL language create a man-machine exchange dialogue frame.We also learn the load on the menu of CAD.At last,when we finish the secondary development of AutoCAD based on magnetic separator,we can get magnetic separator parts diagram automatically by clicking on the new menu of CAD and inputing data into the dialog box. The practice indicates the secondary development of AutoCAD is powerful and plays a very important role in the design of the magnetic separator.so,it is a very significant subject. Keywords：AutoCAD, Visual Lisp,the secondary development,magnetic separator 目 录 TOC \o 1-3 \h \z \u 1 绪论 - 1 - 1.1 相关概念 - 1 - 1.1.1 磁选机 - 1 - 1.1.2 CAD - 1 - 1.1.3 二次开发 - 2 - 1.2 研究背景 - 2 - 1.2