《基于PLC步进电机控制系统的设计》.docVIP

基于plc步进电机控制系统的设计 [摘要]本文所要控制的电机为五相步进电机，采用可编程控制器对其控制，对设计原理及方法分析总结。步进电动机优点有快速起停、定位和精确步进等，日常的生产和生活中比较普遍，控制精度高。在工业过程控制和仪器仪表控制方面，应用的很广泛。本文还介绍的PLC控制系统，其包括硬件结构还有原理以及PLC控制系统设计的原则方法。以五相电机控制为例，阐述了西门子PLC在电机控制中的运用。其基本原理、硬件准备和软件的设计，在文中都有体现。采用的细分驱动方法，可以达到极高的精度并提高稳定性，有利于电机运行品质、转矩波动的改善。本文内容包含PIC外部接线图、I/O地址分配、控制流程图、驱动电路选择、细分驱动分析、梯形图等，并且上位机监控界面是运用组态王软件编写。 [关键词]：S7-200； 五相步进电机； 梯形图； 细分驱动； 组态王 Design of Stepping Motor Control System Based on PLC 矚慫润厲钐瘗睞枥庑赖賃軔朧碍鳝。 [Abstract] The motor controlled in this paper is a five phase stepper motor. It is controlled by a programmable controller. The design principle and method are analyzed and summarized. Stepping motor has the advantages of fast start stop, positioning and accurate stepping, etc., and the daily production and life are more common, and the control accuracy is high. It is widely used in industrial process control and instrument control. PLC control system is introduced, including hardware structure and principle, and the principle and method of PLC control system design. Taking five phase motor control as an example, the application of SIEMENS PLC in motor control is expounded. Its basic principle, hardware preparation and software design are embodied in this article. The subdivision drive method can achieve high accuracy and stability, and is favorable for motor quality and torque fluctuation. The contents of this paper include PIC external wiring diagram, I/O address allocation, control flow chart, drive circuit selection, subdivision drive analysis, ladder diagram and so on, and the upper computer monitoring interface is written by Kingview software.聞創沟燴鐺險爱氇谴净祸測樅锯鳗。 [Key words] S7-200; Five-phase stepping motor; Ladder diagram; Subdivision drive ; Configuration king残骛楼諍锩瀨濟溆塹籟婭骒東戇鳖。 目 录 TOC \o 1-3 \h \z \u 1 引言 1酽锕极額閉镇桧猪訣锥顧荭钯詢鳕。 1.1步进电机的介绍 1彈贸摄尔霁毙攬砖卤庑诒尔肤亿鳔。 1.2 步进电机的分类 1謀荞抟箧飆鐸怼类蒋薔點鉍杂篓鳐。 1.3 步进电机的应用 2厦礴恳蹒骈時盡继價骚卺癩龔长鳏。 1.4 步进电机的各种控制及比较 2茕桢广鳓鯡选块网羈泪镀齐鈞摟鳎。 1.4.1环形分配器步进电机控制系统 2鹅娅尽損鹌惨歷茏鴛賴縈诘聾諦鳍。 1.4.2 单片机步进电机控制系统 3