激光对中仪对中..pptVIP

?1999 Fixturlaser AB * 评估水平不对中 The foot values give the movable machine’s position at the feet where corrections are made. Negative values mean the machine is towards you and must be pushed away. Positive values mean the machine is away from you. Therefore, you will move it towards you. The angle and offset values are used to determine the alignment quality. These values are compared to alignment tolerances to determine whether correction is necessary. ?1999 Fixturlaser AB * 调整过程 不对中数值大于 1 mm (0.025”): 1. Make initial vertical corrections 2. Make initial horizontal corrections 3.