MIL-A-46146B-1990 非腐蚀性室温硫化硅酮密封剂（用于敏感金属和设备）.pdf

NOT MEASUREMENT !XNSTIVE MIL-A-46146B AMENDMENT 3 28 October 1992 SUPERSEDING AMENDMENT 2 21 January 1992 MILITARY SPECIFICATION ADHESIVES-SEALANTS, SILICONE, R’IV,NONCORROSIVE (FORUSE WITH SENSITIVE METALS AND EQUIPMENT) This amendment forms a part of MIL-A-46146B, dated 21 November 1990 and is approved for use by all Departments and Agencies of the Department of Defense PAGE 5 3.3.2.1.1: Delete and substitute: “3.3.2.1.1 ,Eeatresistance. The cured silicone adhesive-sealant for Group I and Group 11 after exposure for 168 4 hours (7days ~ 4 hours) at 392 4°F (200~ 2°C) shall meet the requirements for hardness, tensile strength and elongation as specified in table II when tested as specified in 4.5.3.1.2, except that the tensile strength and elongation for Group II material shall be 250 psi (rein)and 300 percent (rein),respectively. Group 111 material after exposure for 72 4 hrs (3days 4 hrs) at 600 ~ 4°F (316A 2°C) shall have a hardness, Shore A (Durometer)of 601m3x, tensile strength of 200 psi, min (1379KPa)and elongation of 100% min.” AMsc No. A5033 lof4 FSC 8040 DISTRIBU7XON STAXEMENT A Approved for public release; distribution unlimited. AMENDMENT 3 PAGE 12 “TABLE VI. Ql@ljl conformance inspection. Requirements Test