《57,000敞开口散货船双层底的装焊工艺》-毕业论文（设计）.docVIP

毕 业 设 计 专 用 纸 渤海船舶职业学院船舶工程系 PAGE 5 毕业设计（论文） 57,000敞开口散货船双层底的装焊工艺 学生姓名： 指导教师： 专业名称：船舶工程技术 渤海船舶职业学院船舶工程系 摘要 本工艺以57,000吨敞开口散货船为例，正对散货船双层底分段：B221分段装焊工艺设计方案以及注意要点进行了规范，本工艺的标准主要摘自学院内部教材《船体加工与装配课堂学习引导文》（船舶工程技术专业用）其中包括了船体分段建造装配工艺原则，船舶结构的装焊工艺，船体分段装焊工艺，及员工在操作过程中须注意的事项等内容。 由于本人经验不足，水平有限，本工艺必有疏漏欠缺不足之处，敬请老师批评指正。 编者 关键词：分段装配工艺 分段焊接工艺 分段建造工艺 SUMMARY This topic in March 2012 formally established subject group and by LiuXingYong teacher as teacher, was founded in the early group, established the right guidance scheme that is in strict accordance with the graduation design content collection materials, master the methods and regulating the hull assembly, and master the hull production installation method. This process to 57000 tons of bulk carriers open mouth, for example, is for bulk carrier double bottom block: B221 section ZhuangHan process design, and pay attention to main point to carry on the standard, the process of the main standard from college teaching material inside the hull processing and assembly classroom learning guide wen (Marine engineering technology professional use) including the hull building block assembly process principle, the structure of the ship ZhuangHan process, hull ZhuangHan section process, and staff in the operating process must pay attention to matters, etc. Because I lack of experience, the level is limited, this process will lack the omissions deficiency, please correct me teacher criticism. Editor Xu Lei The 2012-3-16 Keywords: block the assembly process of welding technology segmentation build process section 目录 第一章. 57,000吨敞开口散货船的介绍 4 1.1概况 4 1.1.1船型：单壳双底、单舵单螺旋桨柴油机推动、57,000