预应力混凝土箱梁短线法节段预制线形控制_何旭辉.docVIP

文章编号:1003-4722(200905-0064-04 预应力混凝土箱梁短线法节段预制线形控制 何旭辉,马　广 (中南大学土木建筑学院,湖南长沙410075 摘　要:短线法预制线形控制通过每次调整匹配梁的空间位置(局部坐标来保证梁体的设计 线形(整体坐标,因此,必须进行整体坐标和局部坐标之间的转换。在阐述短线法施工工艺及坐标转换原理的基础上,推导短线法预制线形控制的空间坐标转换公式以及节段从浇筑位置到匹配位置的平移量计算公式。结合工程应用,简要探讨节段短线预制与悬臂拼装线形控制的方法与措施。 关键词:简支梁;连续梁;节段预制;短线法;线形控制;坐标转换;悬臂拼装架桥中图分类号:U448.21 文献标志码:A G eometric Shape Control of Precasting of PC Box G irder Segments by Short 2Line Match Method H E Xu 2hui ,MA Gua ng (School of Civil Engineering and Architecture ,Central South University ,Changsha 410075,China Abstract :The designed geomet ric shape (global coordinate of a complete prest ressed con 2crete (PC box girder precast and assembled by t he short 2line match met hod is ensured by t he ge 2omet ric shape co nt rol of p recasting of t he girder segment s t hrough adjust ment of t he spatial posi 2tions (local coordinate of t he matched segment s each time.In t his respect ,t he t ransformation between t he global coordinate and t he local coordinate must be conducted.On t he basis of ex 2pounding of t he co nstruction technology of t he short 2line match met hod and t he principles of t he coordinate t ransformatio n ,t he aut hors deduce t he formulas for t ransformation of t he spatial coor 2dinate for t he geomet ric shape cont rol of precasting by t he short 2line match met hod and also for calculating t he t ranslation amount s of t he segment s fro m t heir positions of casting to matching.Wit h reference to t he p ractical application ,t he aut hors also briefly discuss some of t he met hods and measures for t he geomet ric shape control of t he p recasting by t he short 2line match met hod and cantilever assembly of t he segment s. K ey w ords :simply 2supported girder ;continuous girder ;segment precasting ;short 2line match met hod ;geometric cont rol ;coordinate t ransformation ;balanced cantilever erection 收稿日期:2009-04-01 作者简介:何旭辉(1975-,男,副教授,博士后,1996年毕业于长沙铁道学院桥梁工程专业,工学学士,2001年毕业于中南大学桥梁与隧道工程专业,工学硕士,2004年毕业于中南大学桥梁与隧道工程专业,工学博士(xuhuihe @ 。 1　概