MH254EST单极性 高灵敏 贴片霍尔.pdfVIP

MH254 Specifications Micropower CMOS Unipolar Hall Effect Switch MH254 Hall-effect sensor is a temperature stable, stress-resistant, Low Tolerance of Sensitivity micro-power switch. Superior high-temperature performance is made possible through a dynamic offset cancellation that utilizes chopper-stabilization. This method reduces the offset voltage normally caused by device over molding, temperature dependencies, and thermal stress. MH254 is special made for low operation voltage, 1.65V, to active the chip which is includes the following on a single silicon chip: voltage regulator, Hall voltage generator, small-signal amplifier, chopper stabilization, Schmitt trigger, CMOS output driver. Advanced CMOS wafer fabrication processing is used to take advantage of low-voltage requirements, component matching, very low input-offset errors, and small component geometries. This device requires the presence of unipolar magnetic fields for operation. The package type is in a Halogen Free version has been verified by third party Lab. Features and Benefits  CMOS Hall IC Technology  Strong RF noise protection  1.65 to 6V for battery-powered applications  Operation down to 1.65V, Unipolar Hall Switch Micro power consumption  High Sensitivity for reed switch replacement applications  Low sensitivity drift in crossing of Temp. range  Ultra Low power consumption at 5uA (Avg)  High ESD Protection, HBM ±4KV( min )  Totem-pole output Applications  Solid state switch  Handheld Wireless Handset Awake Switch ( Flip Cell/PHS Phone/Note Book/Flip Video Set)  Magnet proximity sensor for reed switch replacement in low duty cycle applications  Water Meter  PDA