AWWA C512-15 用于水和废水服务的空气释放，空气真空和组合空气阀.pdf

ANSI/AWWA C512-15 (Revision of ANSI/AWWA C512-07) ® AWWA Standard Air-Release, Air/Vacuum, and Combination Air Valves for Water and Wastewater Service Effective date Nov. 1, 2015. First edition approved by AWWA Board of Directors Jan. 26, 1992. This edition approved: June 7, 2015. Approved by American National Standards Institute: July 6, 2015. SM Copyright © 2015 American Water Works Association. All Rights Reserved. AWWA Standard This document is an American Water Works Association (AWWA) standard. It is not a specification. AWWA standards describe minimum requirements and do not contain all of the engineering and administrative information normally contained in specifications. The AWWA standards usually contain options that must be evaluated by the user of the standard. Until each optional feature is specified by the user, the product or service is not fully defined. AWWA pub- lication of a standard does not constitute endorsement of any product or product type, nor does AWWA test, certify, or approve any product. The use of AWWA standards is entirely voluntary. This standard does not supersede or take precedence over or displace any applicable law, regulation, or code of any governmental authority. AWWA standards are intended to represent a consensus of the water supply industry that the product described will provide satisfactory service. When AWWA revises or withdraws this standard, an official notice of action will be placed in the Official Notice section of Journal - American Water Works Association . The action becomes effective on the first day of the month fol- lowing the month of Journal - American Water Works Association publication of the official notice. American National Standard An American