《现代检测技术》（英）教案.doc

PAGE 4 Contents HYPERLINK Chapter1 Level Measurement HYPERLINK Vibronic principle for level switches； HYPERLINK Capacitive level measuring system； HYPERLINK Conductivity Level Measurement; HYPERLINK Hydrostatic principle; HYPERLINK Ultrasonic level measurement; HYPERLINK Radiometric level measurement; HYPERLINK Microwave level measurement; HYPERLINK Chapter 2 Pressure Measurement HYPERLINK Gauge and Absolute Pressure measurement； HYPERLINK Different pressure Transmitter； HYPERLINK Chapter 3 Flow Measurement HYPERLINK Coriolis meter for direct Mass measurement of liquid; HYPERLINK Vortex Flow meters for the measurement of Steam, Gas and Liquids; HYPERLINK Gas mass flow via Temperature measurement; HYPERLINK Ultrasonic principle for Flow rate Measurement HYPERLINK Chapter 4 Analysis Instrumentation HYPERLINK PH/Redox Measurement; HYPERLINK Chlorine Measurement; HYPERLINK Conductivity Measurement; HYPERLINK Dissolved Oxygen Measurement; HYPERLINK Turbidity Measurement; Chapter 1 Level Measurement Unit 1 Vibronic principle for level switches Introduction The LIQUIPHANT and SOLIPHANT limit switch features oscillating probes with piezo-electrically driven, symmetrical sensors. And they all use for level interlock control. Picture of the Level Switch Application Liquiphant can be used for nearly all kinds liquid. It is used to safely and reliably monitor upper and lower limits in tanks. Vessels and piping system. Soliphant is a rugged limit switch for silos containing powdered or fine-grained solids, including those with very low bulk densities. Soliphant can be used for grain, flour, milk powder, cocoa, sugar, animal feed, washing powders, dyes, chalk, plaster, cement, plastic granules etc. Measuring system Operating principle The fork of the Liquiphant S sensor is made to vibrate in air at its resonant frequency by piezo-electric elements. The frequency changes when the fork is submersed in a liquid. When the fork is covered