LCL 型 ICPT 系统电路拓扑分析及参数优化.pdfVIP

中国电源学会第二十一届学术年会论文集 LCL 型ICPT 系统电路拓扑分析及参数优化 张欢，孙跃，唐春森，廖志娟，吴学颖 （重庆大学自动化学院，重庆市 沙坪坝区 400044 ） The Topology Analysis and Parameter Optimization of CLC Type ICPT System ZHANG Huan, SU Yue, Tang Chunsen, LIAO Zhijuan, WU Xueying (College of Automation, Chongqing University, Sha Pingba 400044, Chongqing, China) ABSTRACT: To improve the output power of ICPT system 的新型电能传输技术[1-3] 。由于电源和电气设备之间 with composite compensation and simplify the analyzing 不存在直接电气接触，ICPT系统具有安全、便捷、 process, this paper analyzes the system in three different ways. 易维护、环境亲和力和适应力强等特点。目前，ICPT Firstly, according to the two-port circuit principle, LCL-S type 技术已经广泛应用于生物医疗、轨道交通、家用电 compensation structure is modeled and analyzed, the parameter 器和特殊供电环境等场合[4-6] 。 optimization method which has fixed voltage amplification is given too. Then, the parameter configuring way of LCL-P type 由于ICPT 系统属于松耦合系统，如果不对 topology is given based on AC impedance analysis. After that, 其进行补偿，整个系统中会存在大量的无功功率， the current amplification function of LCL network is analyzed 致使系统输出功率和整体效率较低，不能满足使 and parameter optimization method of LCL-LCL type structure 用要求。如图1 所示，常用的补偿方式有四种， is given according to conservation law of energy. Finally, the 分别为SS、SP 和PS 、PP 。前两种属于电压型ICPT effectiveness of three different compensation structure and 系统，后两种属于电流型ICPT 系统。 parameter configuration methods is certified by experiments. M M