tp4057_42_English单页拓微原厂规格书.pdf免费

京拓微集成电路有限公司 NanJing Top Power ASIC Corp. TP4057 Standalone Linear Li-lon Battery Charger with Thermal Regulation in SOT （Reverse battery protection ） DESCRIPTION The TP4057 is a complete constant-current/constant-voltage linear charger for single cell lithium-ion batteries, Reverse battery protection. Its SOT package and low external component count make the TP4057 ideally suited for portable applications. Furthermore, the TP4057 can work within USB and wall adapter. No external sense resistor is needed, and no blocking diode is required due to the internal PMOSFET architecture and have prevent to negative Charge Current Circuit. Thermal feedback regulates the charge current to limit the die temperature during high power operation or high ambient temperature. The charge voltage is fixed at 4.2V, and the charge current can be programmed externally with a single resistor. The TP4057 automatically terminates the charge cycle when the charge current drops to 1/ 10th the programmed value after the final float voltage is reached. When the input supply (wall adapter or USB supply) is removed, the TP4057 automatically enters a low current state, dropping the battery drain current to less than 2uA. The TP4057 can be put into shut down mode, reducing the supply current to 40uA. Other features include current monitor, under voltage lockout, automatic recharge and two status pin to indicate charge termination and the presence of an input voltage. FEATURES Complete Charge Cycle (600mAh Battery) ·lithium-ion batteries Reverse battery protection ·Programmable Charge Current Up to 500mA 5 ·No MOSFET, Sense Resistor or Blocking Diode 0 Required 3 ·Complete Linear Charger in SOT23-6 Package for