电路板PCB工程师英文EQ整理.pdfVIP

1 基本信息 （1） 问题： the board thickness(2.36+/-0.05mm) is too hard to control for us 对我们来说，板厚 2.36+/-0.05mm 太难管控 建议： Can we control the finished board thickness as 2.4+/-10%mm ？ Please comfirm! 请确认我们可否控制完成板厚为 2.4+/-10%mm ？ （2 ） 问题： As show in figure, manufacturing requirements specification, using 17 um (1/2 oz) based copper, finished surface copper: 46 um (0.00181 ); it is different from what shows 1oz for stackup. 如下图所示， 制作说明要求使用 17um 基铜，完成铜厚