c612-93中文版-隔热的矿物纤维块和隔热的矿物纤维板标准规范.docVIP

C 612 PAGE 246 Designation: C 612 - 93编号：C 612 - 93 PAGE 245 Standard Specification forMineral Fiber Block and Board Thermal Insulation This specification is under the jurisdiction of ASTM Committee C-16 on Thermal Insulation and is the direct responsibility of C16.20 on Homogeneous Inorganic Thermal Insulation.Current edition approved May 15, 1993. Published July 1993. Originally published as C 612 - 67 T. Last previous edition C 612 - 83ε1.本规范由ASTM委员会C-16隔热分委会管辖，并由C16.20衬垫和松 This specification is under the jurisdiction of ASTM Committee C-16 on Thermal Insulation and is the direct responsibility of C16.20 on Homogeneous Inorganic Thermal Insulation.Current edition approved May 15, 1993. Published July 1993. Originally published as C 612 - 67 T. Last previous edition C 612 - 83ε1.本规范由ASTM委员会C-16隔热分委会管辖，并由C16.20衬垫和松散填充绝缘材料分委会直接负责。现行版本于1993年5月15日批准，并于1993年7月出版。最初版本为C This standard is issued under the fixed designation C 612; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (ε) indicates an editorial change since the last revision or reapproval.本标准以固定编号C612刊发；紧随编号后的数字表示最初采用的年份，或者是修订版的最后修订年份。圆括号中的数字表示最新重新批准的年份。上标（ε）表示自上一修订版或重新批准后的编辑性修改。 This specification has been approved for use by agencies of the Department of Defense replacing HH-1-558B in part. Consult the DoD Index of Specifications and Standards for the specific year of issue which has been adopted by the Department of Defense.本标准已获得批准供（美国）国防部各部门使用，部分代替HH-1-558B。对于（美国）国防部采用的具体刊发年份，请查阅（美国）国防部规范与标准索引。 1. Scope适用范围 This specification covers the composition, dimensions, and physical properties of mineral fiber (rock, slag, or glass) board insulation for use on cooled surfaces and on heated surfaces up to 1800℉ (982℃). For specific applications, the maximum and minimum temperature limits shall be agreed upon between the suppl