c126-96中文版-上釉陶瓷结构用饰面瓷砖、面砖和实心砌块的标准规范.docVIP

C 126 PAGE 89 Designation: C 126 - 96编号：C126 - 96 PAGE 86 Standard Specification forCeramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units1上釉陶瓷结构用饰面瓷砖、面砖和实心砌块的标准规范 This specification is under the jurisdiction of ASTM Committee C-15 on Manufactured Masonry Units and is the direct responsibility of Subcommittee CI5.02 on Clay Brick and Structural Clay Tile.本规范贵ASTM负责成品砌块的C-15委员会管辖，并由C15.02粘土砖和结构粘土瓦分委会直接负责。 Current edition approved Dec. 10, 1996. Published February 1997. Originally published as C 126 - 36. Last previous edition C 126 - 95.现行版本于1996年12月10日批准，并于1997年2月出版。最初版本编号为C126-36，上一版本编号为C126-95。 This standard is issued under the fixed designation C 126; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (€) indicates an editorial change since the last revision or reapproval.本标准以固定编号C126刊发；紧随编号后的数字表示最初采用的年份，或者是修订版的最后修订年份。圆括号中的数字表示最新重新批准的年份。上标(ε)表示自上一修订版或重新批准后的编辑性修改。 This standard has been approved for use by agencies of the Department of Defense. Consult the DoD Index of Specifications and Standards for the specific year of issue which has been adopted by the Department of Defense.本标准已获得批准供（美国）国防部各部门使用。对于（美国）国防部采用的具体刊发年份，请查阅（美国）国防部规范与标准索引。 1. Scope适用范围 1.1 This specification covers structural clay load-bearing facing tile and facing brick and other solid masonry units made from clay, shale, fire-clay, or mixtures thereof, with or without the addition of grog or other mixtures, having a finish consisting of a ceramic glaze fused to the body at above 1500°F (655°C) making them inseparable, excluding natural salt-glazed ware. Two grades, based on permissible variation in face dimensions, and two types are covered, as follows:本规范涉及由粘土、页岩、耐火土或其混合物（加或不加熟耐火粘土或其他混合物均可）构成的结构粘土承重饰面瓷砖和面砖，及其他“实心砌块”。除天然盐釉制品外，它们的饰面是在高于1500华氏度（655摄氏度）的温度下将陶釉溶化并牢不可分地附在砖体上形成的。基于容许的