c1400-98中文版-减小新砌墙的风化潜在性的标准指南.docVIP

C 1400 PAGE 932 Designation: C 1400-98编号： C 1400-98 PAGE 928 Standard Guide forReduction of Efflorescence Potential in New Masonry Walls This guide is under the jurisdiction of ASTM Committee C-15 on Manufactured Masonry Units and is the direct responsibility of Subcommittee C15.O5 on Masonry Assemblies. This guide is under the jurisdiction of ASTM Committee C-15 on Manufactured Masonry Units and is the direct responsibility of Subcommittee C15.O5 on Masonry Assemblies.本指南受ASTM委员会C-15制造砌块委员会管辖，并且由C15.05砖石建筑总成分委会直接负责。Current edition approved Aug. 10, 1998. Published January 1999.现行版本于1998年8月10日批准，并于1999年1月出版。 This standard is issued under the fixed designation C 1400; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (ε) indicates an editorial change since the last revision or reapproval.本标准以固定编号C 1400刊发；紧随编号后的数字表示最初采用的年份，或者是修订版的最后修订年份。圆括号中的数字表示最新重新批准的年份。上标(ε)表示自上一修订版或重新批准后的编辑性修改。 1. Scope 适用范围 This guide covers methods for reducing efflorescence potential in new masonry walls.本指南包含减小新砌墙的风化潜在性的方法。 The values stated in inch-pound units are to be regarded as the standard. The SI units given in parentheses are for information only.以英寸-磅为单位的值为标准值。括号内的值仅供参考。 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.本标准并非旨在解决所有与标准使用相关的安全问题（如有）。本标准使用者有责任确立适用的安全和健康规范并在使用前评估其是否符合有关条例。 2. Referenced Documents 参考文件 2.1 ASTM Standards: ASTM标准： C 43 Terminology of Structural Clay Products Annual Book of ASTM Standards, Vol 04.05. ASTM标准年鉴第04.05卷。 Annual Book of ASTM Standards, Vol 04.05. ASTM标准年鉴第04.05卷。 C 67 Test Method for Sampling and Testing Brick and Struct