GPS导航设备-ProGin-GD-735说明书.pdfVIP

GD-735 Data Logger Operation Manual GD-735 Data Logger Operation Manual Rev. 1.0 1, Introduction GD-735 Data Logger is a high capacity and high performance data logging device. It is designed purposely for GPS applications with many features specific for GPS data handling. This data logger is intended for vehicle or vessel use, such as journey record, fleet management, …etc. It is designed with a robust DB-9 connector for handling the slow GPS data stream in a highly trembling environment, and an USB type B receptacle for fast data download to PC or NB after a journey. 1 Gbit flash is capable of storing vast amount of data. Additional data screen functions provide memory space saving. The longest recording period may up to one month. 2, Outlook of the Data Logger On one side of the Data Logger, there are two connectors: DB-9 Connector Connected to a GPS receiver, the pin definition is described in Hardware Interface section. The DB-9 connector is capable of providing DC supply to the receiver. DC Jack For vehicles’ DC 12V power input. 1 GD-735 Data Logger Operation Manual On the other side, there are other connectors and LED indicators: PS2 Connector Bypassing GPS data further to a host device for monitoring instantaneous receiver status. Reset switch To reset the power. USB Connector This type B connector is for data fast download on a PC or NB. LEDs There are Red, Amber, and Green LEDs to indicate the Data Logger status, refered to the LED Indication section. 3, Operation Modes There are two operation modes on the Data Logger: UART mode and USB mode. Only one mode can exist when