jfz30q切换并列箱说明书0sf4590-36v 10e.pdfVIP

Sifang JFZ-30Q Switching Parallel Unit Manual JFZ-30Q Switching parallel Unit Manual Compiled:: Shi Wenhao Checked: Bao Liyong Standardized: Zhen Wei Inspected: Xu Gang Version: V1.0 Doc. Code: 0SF.459.036(E) Issued Date: 2007.06 Copyright owner: Beijing Sifang Automation Co., Ltd. Note: the company keeps the right to perfect the instruction. If products do not agree with the instruction at anywhere, please contact our company in time. We will provide you with corresponding service. Technical support Tel: 010 Faxes: 010 Important prompts Thank you for using products of Beijing Sifang Automation Co., Ltd. In order to safely, correctly and efficiently use the equipment, please do pay attention to following important prompts: 1) This instruction manual is only applicable to JFZ-30Q switching parallel unit. 2) Please read this manual carefully and adjust, test and operate as per the regulations in the manual. If the accompanying information is offered, please refer to the accompanying information. 3) To prevent the unit from damage, it is prohibited to hot plug chip and contact the chips and component in the printing circuit board with the current. 4) Please use the qualified testing instrument and the device for test and detection. 5) If any abnormity happens to the equipment or maintenance is required, please contact service hot line of our company in time. Table of contents 1 General 1 1.1 Key features of the product 1 1.2 Application scope1 1.3 Shape dimension and installation dimension of the product2 2 Technical condition3 2.