网络摄像头硬件系统设计.docxVIP

摘€ 摘€ 摘€ 摘€ 摘要 随着远程监控技术被广泛的应用于军事、工程、日常生活的各个领域，对监 控的质量要求越来越严格，对监控的服务要求也越来越多样化。为了满足各个领 域对高质量高可靠性的远程监控的需求，开发一个性能优良的网络摄像头有非常 重要的意义. 本文提出了一种基于DSP技术的网络摄像头实现方案。该方案采用TI公司的 高性能多媒体数字信号处理器DM6446,对传统摄像头进行了数字化、网络化等技 术改进，硬件设计简单，软件升级容易，安装方便，性价比高。文中详细介绍了 网络摄像头各个模块的设计，包括图像采集、音频编解码、网络传输以及外围设 计。论文最后对系统的实现做兀基本的仿真测试与总结。 I 网络摄像头的设计对提高监控领域的广泛度有着非常积极的意义，可以以此 为契机，大力开展网络摄像头的研究工作。 关键词 高速电路设计；PCB布局布线；电路仿真：多媒体芯片 Abstract Abstract Abstract Abstract Abstract With the long-distance monitoring technology be widely used in application in the military, the project, everywhere of our life, is been more and more strict to the monitoring quality requirement, to monitoring service request also more and more diverse. In order to satisfy each domain to the high qual i ty and quite reliable long-distance monitoring dema nd, develop a advanced network camera is a wonderful choice. This dissertation proposes a kind of systematic design scheme of network camera based on DSP technology. This scheme adopts, the high-performance multimedia digital signal processor DM6446 of TI Conpany to improve the technology of the traditional camera on digitization, networked, etc? It is much easier to devise the hardware and update the software than traditional camera? It is also much more easily to install and has a high cost performance? The paper has demonstrated the design of every module of the network camera, such as image gathering, audio codec ,network transmitting and peripheral design? Finally, the paper makes a basic simulation test and summary about the systent There is very positive meaning for improving the widely of the long-distance monitoring, and we can also think it as an opportunity to expand the research work on the network camera? Key Words High-speed Circuit Design； PCB Layout and Route； Circuit Simulation; Digital Media Systcm-on-Chip 第1 第1章络论 第1 第1章络论 独创性声明 本人声明所呈交的论文是我个人在导师指导下进行的研究工作及取得的研 究成果。尽我所知，除了文中特别加以标注和致谢的地方外，论文中不包含其他 人已经发表或撰写过的研究成果，也不包含为获得北京工业大学或其它教育机构 的学位或证书血使用过的材料。与我一同工作的同志对本研究所做的任何贡献均 已在论文中