阀门行业标准文件：MSS SP6-2001.pdfVIP

STD-MSS SP-b-ENGL 2 0 0 1 = 5770b40 Standard Finishesfor Contact Facesof Pipe Flanges and Connecting-End Flanges ofValves and Fittings Standard Practice Developed and Approved by the Manufacturers Standardization Society of the Valve and Fittings Industry, Inc. I27 Park Street, NE Vienna, Virginia 22180 (703) 281 -661 3 COPYRIGHT Manufacturers Standardization Society of the Valve and FittingsCOPYRIGHT Manufacturers Standardization Society of the Valve and Fittings Licensed by Information Handling ServicesLicensed by Information Handling Services STD-MSS SP-b-ENGL 2001 E 5770b40 OSUL427 524 E MSS STANDARD PRACTICE SP-6 This MSS Standard Practice was developed under the consensus of MSS Technical Committees 102, 11O, 201, and the MSS Coordinating Committee. The content of this Standard Practice is the result of the efforts of competent and concerned volunteers to provide an effective, clear, and non-exclusive specification that will benefit the industry as a whole. This MSS Standard Practice is intended as a basis for common practice by the manufacturer, the user, and the general public. The existence of an MSS Standard Practice does not in itselfpreclude the manufacture, sale or use of products not conforming to the Standard Practice Mandatory conformance is established only by reference in a code, specification, sales contract, or public law, as applicable. Substantive changes in this 2001 edition are “flagged” by parallel bars as