隔离电源与离线式pwm控制器参考设计指南.docVIP

Quick Reference Guide for Isolated and Off-Line PWM Controllers and Other Useful Helper ICs This document lists data sheets and applications information for isolated power supply designs. Links, shown in blue, take you to the full documentation on the Maxim website. 19-2066; Rev 1; 9/01 Current-Mode PWM Controllers for Isolated Power Supplies General Description Features The MAX5021/MAX5022 current-mode PWM controllers contain all the control circuitry required for the design of wide input voltage range isolated power supplies. These devices are well suited for use in universal input (85VAC to 265VAC) off-line or telecom (-36VDC to -72VDC) power supplies. ? Available in a Tiny 6-Pin SOT23 Package ? 50μA Typical Startup Current ? 1.2mA Typical Operating Current ? Large UVLO Hysteresis of 14V An undervoltage lockout (UVLO) circuit with large hys- teresis coupled with low startup and operating current reduce power dissipation in the startup resistor and allow use of ceramic bypass capacitors. The 262kHz switching frequency is internally trimmed to ±12% accuracy; this allows the optimization of the magnetic and filter components resulting in compact, cost-effec- tive power supplies. The MAX5021 with 50% maximum duty cycle and MAX5022 with 75% maximum duty cycle are recommended for forward converters and fly- back converters, respectively. The MAX5021/MAX5022 are available in 6-pin SOT23, 8-pin μMAX, and 8-pin DIP packages and are rated for operation over the -40°C to +85°C temperature range. ? Fixed Switching Frequency of 262kHz ±12% ? 50% Maximum Duty Cycle Limit (MAX5021) ? 75% Maximum Duty Cycle Limit (MAX5022) ? 60ns Cycle-by-Cycle Current-Limit Response Time Ordering Information PART MAX DUTY CYCLE TEMP. RANGE PIN- PACKAGE TOP MARK Applications Universal Off-Line Power Supplies Standby Power Supplies Isolated Power Supplies MAX5021EUT 50% -40°C to +85°C 6 SOT23-6 AASQ MAX5021EUA 50% -40°C to +85°C 8 μMAX — MAX5021EPA 50% -40°C to +85°C 8 PDIP — MAX5022EUT 75%