MIL-DTL-83513.18C-2003 标准规范下载.pdf

INCH-POUND MIL-DTL-83513/18C 27 February 2003 SUPERSEDING MIL-PRF-83513/18B 15 August 1997 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, MICROMINIATURE, POLARIZED SHELL, RIGHT ANGLE, PIN CONTACTS, 4 ROW, SOLDER TYPE, STANDARD PROFILE, 100 CONTACTS, PRINTED CIRCUIT BOARD This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification and MIL-DTL-83513. Inches mm Inches mm Inches mm Inches mm .003 0.08 .050 1.27 .177 4.50 1.3838 35.148 .007 0.18 .0669 1.699 .185 4.70 1.800 45.72 .0038 0.097 .125 3.18 .225 5.72 2.500 63.50 .010 0.25 .140 3.56 .2708 6.878 2.780 70.61 .015