SWC掣震钢索安装说明.PDFVIP

SWC 掣震鋼索安裝說明 SWC Seismic snubber steel rope installation guide 安裝前，請確認避震器之型號規格是否正確。 Before installation, make sure the model and the specification are correct. 安裝說明 Installation guide • 所需工具：公制口徑19mm (M12)、24mm (M16)、扭力扳手、電熱槍、鋼索剪。 Required tools: 19mm(M12) and 24mm(M16) torque wrenches, electric heat gun, and steel rope cutter. • 請先於設備端預留掣震彎板安裝之孔位請先於設備端預留掣震彎板安裝之孔位 ，並以固定螺栓將掣震彎板與設備固定並以固定螺栓將掣震彎板與設備固定 ，但不鎖緊但不鎖緊 。((如圖如圖1)1) Reserve the installation holes of seismic snubber bending plate on the equipment and fasten with fixed bolt without locking it (Fig 1).