凸轮分析作业电子教案.pptVIP

Ex.5-1 A plate cam with positive-offset translating roller follower is to have the following motion: a rise through lift h=40mm with a sine acceleration motion curve during ?0=150?, ?S=30?, a return with a 3-4-5 polynomial motion curve during ?0=120?, and ?S=60?. The cam rotates clockwise. The given dimensions are: rP=40mm. rR=12mm, e=12mm and rC=25mm. Construct the pitch curve and the cam contour graphically with a scale of 1:1. Label in red ink the centreline of the follower, S, the roller and the pressure angle ? corresponding to ? = 60? and ? = 0?.; Ex.5-1;典型错误：1、偏置方向错误2、不应???方向作图3、基