HP惠普远程图形软件RGS.ppt

网络性能需求 (1) 25% 屏幕刷新率 ---日常办公 Network latency and bandwidth requirements for desired update rates Assumptions Average image change percentage 25% Average image compress rate ( x to 1) 20 == Varies but use 20 for CADnatural imagery. Network theoretical capacity (Mbps) 100 Available application network bandwidth 30% Total network latency (ms, roundtrip) 10 1 3 5 7 9 11 13 15 24 30 60 1000 333 200 143 111 91 77 67 42 33 17 Million Pixels Compressed Mbits per frame (Mbp/frame) VGA 640x480 0.31 0.09 0.1 0.3 0.5 0.6 0.8 1.0 1.2 1.4 2.2 2.8 5.5 DVD 4:3 720x540 0.39 0.12 0.1 0.3 0.6 0.8 1.0 1.3 1.5 1.7 2.8 3.5 7.0 XGA 1024x768 0.79 0.24 0.2 0.7 1.2 1.7 2.1 2.6 3.1 3.5 5.7 7.1 14.2 SXGA 1280x1024 1.31 0.39 0.4 1.2 2.0 2.8 3.5 4.3 5.1 5.9 9.4 11.8 23.6 1600x1200 1.92 0.58 0.6 1.7 2.9 4.0 5.2 6.3 7.5 8.6 13.8 17.3 34.6 1920x1200 2.30 0.69 0.7 2.1 3.5 4.8 6.2 7.6 9.0 10.4 16.6 20.7 41.5 Dual SXGA 2560x1024 2.62 0.79 0.8 2.4 3.9 5.5 7.1 8.7 10.2 11.8 18.9 23.6 47.2 Triple SXGA 3840x1024 3.93 1.18 1.2 3.5 5.9 8.3 10.6 13.0 15.3 17.7 28.3 35.4 70.8 Quad SXGA 5120x1024 5.24 1.57 1.6 4.7 7.9 11.0 14.2 17.3 20.4 23.6 37.7 47.2 94.4 Too much network latency Borderline network bandwidth Not enough network bandwidth Required Network Bandwidth = (total # of pixels on sender screen ) x (24 bits) x (average image change %) x (average compress rate) x (frame update rate) Note 1: average image change % differes based on application type, user operation, object size on screen, etc. Note 2: average compress rate differes based on content of image; natural image, synthetic graphics, text, etc. Note 3: frame update rate is governed by network latency, application response time, and sender CPU processing delay Sender screen resolution Network latency must be less than == (ms) Desired receiver screen update rate: fps (frames/sec) Required Network Bandwidth (Mbps) available to RGS 网络性能需求(2) 45% 屏幕刷新率 (CAD) 网络性能需求(3) 90% 屏幕刷新率 (video clip) Network latency and bandwidth requirements for desir