AS4133.4.3.1-2009 国外国际规范.pdfVIP

1 AS 4—2009 Australian Standard® Methods of testing rocks for engineering A S 4 purposes 1 3 3 . 4 . 3 Method 4.3.1: Rock strength tests— . 1 2— Determination of deformability of rock materials 0 0 9 in uniaxial compression—Strengths of 50 MPa and greater 1 SCOPE This Standard sets out the method for determining the stress-strain characteristics and Young’s modulus, and Poisson’s ratio in uniaxial compression of a rock sample in the form of specimens of regular geometry. CAUTION: SOME OF THE TESTS SPECIFIED IN THIS STANDARD INVOLVE THE USE OF PROCESSES THAT COULD LEAD TO A HAZARDOUS SITUATION. 2 REFERENCED DOCUMENT The following document is referred to in this Standard: AS 2193 Calibration and classification of force-measuring systems 3 APPARATUS The following apparatus is required: (a) A suitable machine for applying and measuring axial load to the specimen. It shall be of sufficient capacity and capable of applying load at the rate specified in Clause 5. 9 0 The machine shall include a force-measuring device meeting the accuracy and 0 2 r repeatability requirements of AS 2193, Class B testing machines for the range of a M forces used in the test. 8 0 n o (b) Steel discs havin