AS3580.9.8-2008 国外国际规范.pdfVIP

1 AS 3580.9.8—2008 Australian Standard® A Methods for sampling and analysis of ambient air S 3 5 8 0 Method 9.8: Determination of suspended . 9 . 8 particulate matter—PM continuous direct mass — 10 2 0 0 method using a tapered element oscillating 8 microbalance analyser PREFACE This Standard was prepared by the Joint Standards Australia/Standards New Zealand Committee EV-007, Methods for Examination of Air, as an Australian Standard to supersede AS 3580.9.8—2001. After consultation with stakeholders in both countries, Standards Australia and Standards New Zealand decided to develop this Standard as an Australian Standard rather than an Australian/New Zealand Standard. The objective of this Standard is to provide regulatory and testing bodies with a standard method for continuously monitoring suspended particulate matter changes of particles less than 10 micrometres in ambient air, providing near real time measurement of mean particle concentration. The objective of this revision was to clarify the error allowed in the measurement of flow rates, especially flow audit checks, and to better define noise check requirements.