16cfr1500.44-2009 国外国际规范.pdfVIP

§ 1500.44 16 CFR Ch. II (1–1–09 Edition) [51 FR 28539, Aug. 8, 1986] § 1500.44 Method for determining ex- port it by means of metal ringstands, tremely flammable and flammable clamps, rings, or other suitable devices solids. as needed, so that the major axis is ori- (a) Preparation of samples—(1) Gran- ented horizontally and the maximum ules, powders, and pastes. Pack the sam- surface is freely exposed to the atmos- ple into a flat, rectangular metal boat phere. with inner dimensions 6 inches long × 1 (b) Procedure. Place the prepared inch wide × one-fourth inch deep. sample in a draft-free area that can be (2) Rigid and pliable solids. Measure ventilated and cleared after each test. R the dimensions of the sample and sup- The temperature of the sample at the F C h t i w 3 462 6 C P