AS4032.2-2005_A2-2009 国外国际规范.pdfVIP

AS 4032.2/Amdt 2/2009-06-15 STANDARDS AUSTRALIA Amendment No. 2 to AS 4032.2—2005 Water supply—Valves for the control of hot water supply temperatures Part 2: Tempering valves and end-of-line temperature-actuated devices REVISED TEXT The 2005 edition of AS 4032.2 is amended as follows; the amendment(s) should be inserted in the appropriate place(s). SUMMARY: This Amendment applies to Clauses 1.1, 1.3, 2.9 and 4.3. Published on 15 June 2009. AMDT Clause 1.1 No. 2 JUN 1 Delete ‘heated water at’ from Item (b). 2009 2 Insert the words ‘heated water at’ at the beginning of Items (b)(i) and (ii). AMDT Clause 1.3 No. 2 JUN From the ‘AS’ referenced documents list, delete the following: 2009 ‘2837 Wrought alloy steels—Stainless steel bars and semi-finished products’ AMDT Clause 2.9 No. 2 JUN 1 Delete ‘AS 2837’ from Item (c)(i). 2009 2 Delete existing Item (d) and replace with the following: (d) Nickel-copper-iron Nickel-copper-iron shall comply with ASTM B127, ASTM B163, ASTM B164 and ASTM B165. 9 0 AMDT Clause 4.3 0 2 No. 2 l u JUN J Delete existing Item (a) and replace with the following: 5 2009 0 n (a) Tempering valves shall incorpor