ASMESECTIONIIBSB-516-2009 国外国际规范.pdfVIP

2009b SECTION II, PART B SB-516 SPECIFICATION FOR WELDED NICKEL-CHROMIUM- A09 IRON ALLOY (UNS N06600, UNS N06603, UNS N06025, AND UNS N06045) TUBES SB-516 (Identical with ASTM Specification B 516-03 except that certification and a test report have been made mandatory.) 1. Scope 4. Ordering Information 1.1 This specification covers welded UNS N06600, 4.1 It is the responsibility of the purchaser to specify all N06603, N06025, and N06045 alloy boiler, heat requirements that are necessary for the safe and satisfactory exchanger, and condenser tubes for general corrosion performance of material ordered under this specification. resisting and low or high-temperature service. Examples of such requirements include, but are not limited 1 to, the following: 1.2 This specification covers tubes ⁄ 8 to 5 in. (3.18 to 127 mm), inclusive, in outside diameter and 0.015 to 0.500 4.1.1 Quantity (feet or number of lengths), in. (0.38 to 12.70 mm), inclusive, in wall thickness. Table 4.1.2 UNS number, 2 of Specification B 751 lists the dimensional requirements 4.1.3 Size (outside diameter minimum or average of these sizes. Tubes having other dimensions may be wall thickness), furnished provided such tubing complies w