毕业设计（论文）-高层建筑火灾智能监测系统设计.doc

兰州理工大学毕业设计 PAGE I LANZHOU 毕业设计 题 目 高层建筑火灾智能监测系统设计 学生姓名 学 号 专业班级 自动化1班 指导教师 学 院 电气工程与信息工程 答辩日期 2016年6月 摘要 随着社会的进步和发展，人们将建筑建得越来越高，以至于在火灾发生时，人们的逃生越来越难，人们的人身和财产损失越来越大。人们迫切的需要一种能够监控和提前报警的智能火灾监控系统来保证大家的人身和财产安全，减少不必要的损失。火灾智能监控系统能够迅速的监控火灾情况，发现火灾发生的早期特征。火灾智能监测系统是一种集检测、传输、处理、报警于一体的系统。本设计的火灾智能监测系统以西门子PLC-S7300为控制器，深圳市泛海三江电子有限公司的JTY-GD-930K型点型光电感烟火灾探测器和JTW-ZD-920K型点型感温火灾探测器探测火灾发生时的烟雾和温度。当感烟探测器探测的烟雾浓度超过规定的安全线或者感温探测器探测到的环境温度超过系统规定的额定值时，火灾智能监控系统马上给声光报警器发出信号，使声光报警器报警，人们可以通过声光报警器提前知道火灾发生。 关键词:PLC；自动控制；火灾监测 全套图纸加扣 3346389411或3012250582Abstract With the progress and development of society, people will be building was built higher and higher, so that in the event of a fire, people are increasingly difficult to escape, personal and property damage people's growing. People urgently need a way to monitor and intelligent fire alarm control system in advance to ensure everyone's personal and property safety, reduce unnecessary losses. Intelligent monitoring system to quickly fire monitoring fire conditions, early detection characteristics fires. Fire Monitoring System is a set of intelligent detection, transmission, processing, in one of the alarm system. The design of intelligent fire monitoring system based on Siemens PLC-S7300 controller, Shenzhen Asia Standard Sanjiang Electronics Co. JTY-GD-930K-type point type photoelectric smoke detectors and JTW-ZD-920K-type point type heat fire and smoke detector detects the temperature of the fire occurred. When the smoke detector detects smoke concentration exceeds a predetermined safety line or temperature detector detects the ambient temperature exceeds the specified rating system, the fire intelligent monitoring system immediately sends a signal to the audible alarm, so that sound and light alarm alarm, people can know ahead of sound and light alarm fire. Keywords: PLC; Automatic control; Fire monitoring  目录 TOC \o "1-3" \h \z \u