执行标准：苏宁食药监械（准）字2010第1220050号.docVIP

KD-2012D-3 Examination light USER MANUAL Ⅰ Brief introduction Scope of application：Suitable for the auxiliary lighting in operation room Model: KD-2012D-3 Characteristic: The light uses the long-life and low-energy LED light source which has the characteristics of simple operation, easy installation, safety with low voltage, hard to be damaged. Product component: Lamp holder, power box, light support etc. II Performance Summarize It is designed with the system of cold lighting, wide voltage power supply which can adapt to the voltage of the countries all over the world; low-voltage,energy-saving,stable performance, safe and reliable, long service life. The design and production of this light source strictly executes the first part of the safety requirements of medical electrical equipment GB9706.1-2007: general requirements are guaranteed in safety. III Main technical parameters Input Voltage:110~220V50Hz Color Temperature：6000±500K CRI：80≤Ra≤100 Fuse：F3AL250V Power of Bulb：3W*12 IV Security tips and symbol instructions 1. When the examination light is in use, you should always abide by the basic safety precautions in order to avoid fire, electric shock or the risk of injury,. (1) Please read the instructions carefully, and operating according to the requirements. (2) When replace the bulb, please unplugged the power cord and close the total power supply. (3) Replace the fuse as the same as the old one according to identifying. 2. The introduction of the following symbols Attention! Check the random documents Protect the grounding Disconnect the power Connect the power V Working Environment Environmental temperature:5℃～40℃ Relative humidity:≤85% The atmosphere:86.0KPa～106.0KPa VI Product interface Light holder Brightness adjusting knob ⑶ Tube ⑷ locked cover of the tube ⑸ Lifting support ⑹ Fixed support ⑺ Locked screw of lifting support Picture 1 ⑻ Light base ⑼ Wheel ⑽ Light foot ⑾ Power socket ⑿ Power s