哈希HACH在线检测仪表UPW-ANATEL - A-4000 Specification Sheet (email version).pdf

A-4000 On-line TOC Analyzer The A-4000 TOC Analyzer is a rugged, low-maintenance instrument designed for continuous on-line measurements in… Semiconductor reclaim and recycle applications The A-4000 responds to a change in TOC values in less than 3 min. so that operators can make the fastest decision possible for diverting water to recycle or reclaim loops or to acid/base neutralization and finally to waste. Typical install locations would be immediately after the cleaning process and before the initial holding tanks and also throughout the recycle/reclaim loops as the water is being prepared for final UPW processing. The A-4000 TOC Analyzer provides the fastest results for maximum decision-making information. In less than 3 minutes, the A-4000 displays 20% (T20) of the final value of a TOC change or excursion in the water loop… more than enough data to make the required recycle/reclaim decision. Also, the “rate-of-change” data are displayed to provide an even more sensitive indication of a TOC excursion. An advanced calibration utility provides 1 – 10 points to ensure complete bracketing of your TOC sample range and to compensate for any background TOC commonly found in make-up water. The solid-walled PVDF (KYNAR) NDIR detector is the most rugged and trouble free of any available with TOC analyzers. In less than 2 minutes you can remove it, open it, wipe it clean, and reinstall it. In addition to a wide selection of analysis ranges,